Add to ORKGResults of the large-scale experiments being performed in the QUENCH test facility as well as results of accompanying single-rod and separate-effects tests are presented
24 heated rods (internal tungsten heaters between 0 and 1024 mm, cladding oxidised region between-47...
Heat transfer characteristics of intact fuel pins under reflood conditions have been extensively stu...
Recorded test data are presented for Tests S-03-1, S-03-2, S-03-3, and S-03-4 of the Semiscale Mod-1...
The QUENCH-12 experiment investigated the effects of VVER materials and bundle geometry on core refl...
The objective of the QUENCH experimental program at the Karlsruhe Research Center is to investigate ...
The paper gives an overview on the status of the QUENCH program at FZK, including complementary bund...
Abstract – The QUENCH-12 experiment was carried out to investigate the effects of VVER materials (ni...
Phenomenon of quenching of hot fuels in core during bottom reflooding following loca event is invest...
The QUENCH experiments are to investigate the hydrogen release resulting from the water injection in...
The QUENCH experiments are aimed at investigating the hydrogen source term resulting from water inje...
International audienceDuring a severe accident, one of the main accident management procedure consis...
Abstract – The QUENCH experimental programme at FZ Karlsruhe investigates phenomena associated with ...
The QUENCH-14 experiment investigated the effect of M5 ® cladding material on bundle oxidation and c...
Two 200% cold leg break loss-of-coolant experiments performed in the LOFT facility have exhibited ea...
In this paper are presented the MELCOR preliminary calculation, which was performed to investigate b...
24 heated rods (internal tungsten heaters between 0 and 1024 mm, cladding oxidised region between-47...
Heat transfer characteristics of intact fuel pins under reflood conditions have been extensively stu...
Recorded test data are presented for Tests S-03-1, S-03-2, S-03-3, and S-03-4 of the Semiscale Mod-1...
The QUENCH-12 experiment investigated the effects of VVER materials and bundle geometry on core refl...
The objective of the QUENCH experimental program at the Karlsruhe Research Center is to investigate ...
The paper gives an overview on the status of the QUENCH program at FZK, including complementary bund...
Abstract – The QUENCH-12 experiment was carried out to investigate the effects of VVER materials (ni...
Phenomenon of quenching of hot fuels in core during bottom reflooding following loca event is invest...
The QUENCH experiments are to investigate the hydrogen release resulting from the water injection in...
The QUENCH experiments are aimed at investigating the hydrogen source term resulting from water inje...
International audienceDuring a severe accident, one of the main accident management procedure consis...
Abstract – The QUENCH experimental programme at FZ Karlsruhe investigates phenomena associated with ...
The QUENCH-14 experiment investigated the effect of M5 ® cladding material on bundle oxidation and c...
Two 200% cold leg break loss-of-coolant experiments performed in the LOFT facility have exhibited ea...
In this paper are presented the MELCOR preliminary calculation, which was performed to investigate b...
24 heated rods (internal tungsten heaters between 0 and 1024 mm, cladding oxidised region between-47...
Heat transfer characteristics of intact fuel pins under reflood conditions have been extensively stu...
Recorded test data are presented for Tests S-03-1, S-03-2, S-03-3, and S-03-4 of the Semiscale Mod-1...