In this study, two heat exchangers were used as condensers in the same air-conditioning system, one with round tubes and the other with flat micro channel tubes. The window air conditioning systems was designed for R-22 and its alternative R-410A, with the micro channel and round tube condensers were constructed and investigated between the atmospheric temperatures 35C to 41C. This work presents the difference measured in the performance for both condensers. The performance of the air conditioner with R-410A was compared with the baseline performance with R-22.The COP of micro channel condenser with R-22 is 4.52 % and with R-410A is 11.3 % higher than the round tube condenser. For R-22, the heat transfer in the round tube condenser is 0.75 ...
The aim of the present study was to investigate the thermal performance of window systems using full...
Abstract: The specific objective of this study was to develop an IRDS (integrated receiver drier sub...
A test facility was built for the purpose of performing heat transfer studies on microchannel heat ...
The objective of this study is to present test results on the basis of experimental data of capillar...
In this work, a performance study was achieved on air cooled condenser of an air-conditioning unit. ...
In this paper, simulation studies of a one TR window air conditioner were carried out with three dif...
An experimental study of a fin and tube condenser was performed using two different configurations o...
Mathematical and numerical study of finned tube air cooled condenser for air conditioning unit with ...
This study is the result of the cooperative research and development agreement (CRADA) between Oak R...
Reduction of energy consumption is a major concern in the vapor compression refrigeration cycle espe...
In this paper, an experimental analysis of conventional air-cooled and microchannel condensers in au...
The condensate on the surface of the minichannel heat exchanger generated during aircooling substant...
This paper presents simulation results for the heat exchangers of an HCFC-22 window air conditioner ...
Much experimental and theoretical analysis of potential R-22 replacements has been accomplished. How...
One of the important aspects in thermal design is refrigeration and air conditioning. Working princi...
The aim of the present study was to investigate the thermal performance of window systems using full...
Abstract: The specific objective of this study was to develop an IRDS (integrated receiver drier sub...
A test facility was built for the purpose of performing heat transfer studies on microchannel heat ...
The objective of this study is to present test results on the basis of experimental data of capillar...
In this work, a performance study was achieved on air cooled condenser of an air-conditioning unit. ...
In this paper, simulation studies of a one TR window air conditioner were carried out with three dif...
An experimental study of a fin and tube condenser was performed using two different configurations o...
Mathematical and numerical study of finned tube air cooled condenser for air conditioning unit with ...
This study is the result of the cooperative research and development agreement (CRADA) between Oak R...
Reduction of energy consumption is a major concern in the vapor compression refrigeration cycle espe...
In this paper, an experimental analysis of conventional air-cooled and microchannel condensers in au...
The condensate on the surface of the minichannel heat exchanger generated during aircooling substant...
This paper presents simulation results for the heat exchangers of an HCFC-22 window air conditioner ...
Much experimental and theoretical analysis of potential R-22 replacements has been accomplished. How...
One of the important aspects in thermal design is refrigeration and air conditioning. Working princi...
The aim of the present study was to investigate the thermal performance of window systems using full...
Abstract: The specific objective of this study was to develop an IRDS (integrated receiver drier sub...
A test facility was built for the purpose of performing heat transfer studies on microchannel heat ...