Add to ORKGAbstract: The limitation of the high speed analog to digital converters and synchronization systems causes the miss-timed sampling of the signals, which results the timing jitter. The seriousness of this effect greatly increases for the multicarrier systems like OFDM, because of their structure where all sub-carriers may get affected by single sample. The removal (or suppression) of the timing jitter is hence one of the challenging task for the system designers. This paper presents an analysis of one of the jitter suppressing technique named “Over-Sampling”, for its effectiveness the paper presents a detailed analysis on the basis of most practical OFDM mathematical modeling and simulation. The presented model facilities to analyze differen...
A general analysis on stochastic timing errors (clock or timing jitter) is presented for Digital to ...
要 約- This paper proposes a technique to reduce sampling clock jitter effects in high speed ADCs. Fir...
Timing offsets result from the use of real clocks that are non-ideal in sampling intervals. These o...
This paper presents a new way to address and mitigate sampling jitter in high-frequency bandpass-sam...
This article addresses the analysis and digital signal processing (DSP)-based mitigation of phase no...
Clock timing jitters refer to random perturbations in the sampling time in analog-to-digital convert...
Today, many wired and wireless communication systems use orthogonal frequency division multiplexing ...
In this paper, the problem of sampling-jitter estimation in OFDM full-duplex radio transceivers is a...
Abstract—A feasibility study is made of an OFDM system based on analog multipliers and integrate-and...
A feasibility study is made of an OFDM system based on analog multipliers and integrate-and-dump blo...
10.1109/CCNC.2012.61811662012 IEEE Consumer Communications and Networking Conference, CCNC'2012792-7...
This paper provides an overview of the effects of timing jitter in audio sampling analog-to-digital ...
University of Minnesota Ph.D. dissertation. December 2019. Major: Electrical Engineering. Advisor: R...
International audienceFor high-speed analog-to-digital converters, sampling jitter is a relevant par...
The sampling jitter is particularly problematic in systems where high-frequency signals are sampled....
A general analysis on stochastic timing errors (clock or timing jitter) is presented for Digital to ...
要 約- This paper proposes a technique to reduce sampling clock jitter effects in high speed ADCs. Fir...
Timing offsets result from the use of real clocks that are non-ideal in sampling intervals. These o...
This paper presents a new way to address and mitigate sampling jitter in high-frequency bandpass-sam...
This article addresses the analysis and digital signal processing (DSP)-based mitigation of phase no...
Clock timing jitters refer to random perturbations in the sampling time in analog-to-digital convert...
Today, many wired and wireless communication systems use orthogonal frequency division multiplexing ...
In this paper, the problem of sampling-jitter estimation in OFDM full-duplex radio transceivers is a...
Abstract—A feasibility study is made of an OFDM system based on analog multipliers and integrate-and...
A feasibility study is made of an OFDM system based on analog multipliers and integrate-and-dump blo...
10.1109/CCNC.2012.61811662012 IEEE Consumer Communications and Networking Conference, CCNC'2012792-7...
This paper provides an overview of the effects of timing jitter in audio sampling analog-to-digital ...
University of Minnesota Ph.D. dissertation. December 2019. Major: Electrical Engineering. Advisor: R...
International audienceFor high-speed analog-to-digital converters, sampling jitter is a relevant par...
The sampling jitter is particularly problematic in systems where high-frequency signals are sampled....
A general analysis on stochastic timing errors (clock or timing jitter) is presented for Digital to ...
要 約- This paper proposes a technique to reduce sampling clock jitter effects in high speed ADCs. Fir...
Timing offsets result from the use of real clocks that are non-ideal in sampling intervals. These o...