Signal Processing on Digitized Ladar Waveforms for Enhanced Resolution on Surface Edges

Automatic target recognition (ATR) relies on images from various sensors including 3-D imaging ladar. The accuracy of recognizing a target is highly dependent on the number of points on the target. The highest spatial frequencies of a target are located on edges. Therefore, a higher sampling density is desirable at these locations. A ladar receiver captures information on edges by detecting two surfaces when the beam lands partially on one surface and partially on another if the distance between the surfaces is greater than the temporal pulse width of the laser. In recent years, the ability to digitize the intensity of the light seen at the ladar receiver has led to digitized ladar waveforms that can be post-processed. Post-processing the data allows signal processing techniques to be implemented on stored waveforms. The digitized waveform provides more information than simply a range from the sensor to the target and the intensity of received light. Complex surfaces change the shape of the return. This thesis exploits this information to enhance the resolution on the edges of targets in the 3-D image or point cloud. First, increased range resolution is obtained by means of deconvolution. This allows two surfaces to be detected even if the distance between the