An Investigation on Generation of Electricity Using Foot Step

Nowadays energy and power are the one of the basic necessities regarding this modern world. As the demand of energy is increasing day by day, so the ultimate solution to deal with these sorts of problems is just to implement the renewable sources of energy. But these renewable energy sources must have to be adopted in practical manner by keeping an eye on all aspects regarding the research work. So then these techniques should be applied in order to get the desired output. The objective of this work is power generation through footsteps as a source of renewable energy that we can obtained while walking on to the certain arrangements like footpaths, stairs, plate forms and these systems can be install elsewhere specially in the dense populated areas. The basic working principle of ‘footstep power generation system ’ is based on the crank shaft and gear arrangement and fly wheel. So in order to implement this foot step power generation system we adjust the wooden plates above and below the sensors and moveable springs, when we walk on the mat than automatically force is applied and as a result magnet fixed under the top wooden sheet and moves into the cavity. As this cavity is fixed at bottom wooden sheet of mat so between the moveable springs adjusted between the top and bottom sheets. As a result of completing the above procedure or technique we made ourselves able to design such compatible system through which we could run our home appliances through AC output. As our main purpose was to charge the battery through DC output and then b