Add to ORKGAdaptation of commercial instrument which measures nitrogen and oxygen in steel gave results in less than four minutes. Sample is heated in helium atmosphere in single-use graphite crucible. Platinum flux facilitates melting of sample. Released gases are separated chromatographically and measured in thermal-conductivity cell
The work was carried out from September 2011 to March 2012. The project was supported by Uddeholms A...
Chemical reaction mechanism of stress corrosion cracking of titanium alloys exposed to liquid nitrog...
A spectrometric determination of nitrogen in steel was performed with d.c. arc excitation in the vac...
Comparison of nitrogen determination in tantalum alloys by Kjeldahl and vacuum fusion technique
This report compares results obtained for the determination of nitrogen in a selected group of niobi...
This report compares results obtained for the determination of nitrogen in the tantalum-base alloys ...
In the analysis of nitrogen in metals by the vacuum fusion or the carrier gas fusion method, lower v...
Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 10-11).Mode of...
The authors studied the electro-chemical method for determining nitrogen, which is in solid solution...
Very pure nitrogen obtained by zirconium-titanium alloy getter in ultrahigh vacuum syste
This paper discusses a new process for converting atmospheric nitrogen into nitric acid and nitric o...
Study of chemical reactivity mechanism of nitrogen tetroxide with titanium alloy
Dispersion strengthened tantalum base alloys - development with evaluation of oxygen contaminated an...
Reactions between liquid dinitrogen tetraoxide and titanium alloy that result in stress corrosion cr...
Rare earth and thorium alloying of chromium and mechanism for controlling nitrogen embrittlemen
The work was carried out from September 2011 to March 2012. The project was supported by Uddeholms A...
Chemical reaction mechanism of stress corrosion cracking of titanium alloys exposed to liquid nitrog...
A spectrometric determination of nitrogen in steel was performed with d.c. arc excitation in the vac...
Comparison of nitrogen determination in tantalum alloys by Kjeldahl and vacuum fusion technique
This report compares results obtained for the determination of nitrogen in a selected group of niobi...
This report compares results obtained for the determination of nitrogen in the tantalum-base alloys ...
In the analysis of nitrogen in metals by the vacuum fusion or the carrier gas fusion method, lower v...
Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 10-11).Mode of...
The authors studied the electro-chemical method for determining nitrogen, which is in solid solution...
Very pure nitrogen obtained by zirconium-titanium alloy getter in ultrahigh vacuum syste
This paper discusses a new process for converting atmospheric nitrogen into nitric acid and nitric o...
Study of chemical reactivity mechanism of nitrogen tetroxide with titanium alloy
Dispersion strengthened tantalum base alloys - development with evaluation of oxygen contaminated an...
Reactions between liquid dinitrogen tetraoxide and titanium alloy that result in stress corrosion cr...
Rare earth and thorium alloying of chromium and mechanism for controlling nitrogen embrittlemen
The work was carried out from September 2011 to March 2012. The project was supported by Uddeholms A...
Chemical reaction mechanism of stress corrosion cracking of titanium alloys exposed to liquid nitrog...
A spectrometric determination of nitrogen in steel was performed with d.c. arc excitation in the vac...