EXPERIMENTAL INVESTIGATION ON CONCRETE BY PARTIAL REPLACEMENT OF FINE AGGREGATE USING FOUNDRY SAND WITH SUPERPLASTISIZER

Metal foundries use large amounts of the metal casting process. Foundries successfully recycle and reuse the sand many times in a foundry and the remaining sand that is termed as foundry sand is removed from foundry. This study presents the information about the civil engineering applications of foundry sand, which is technically sound and is environmentally safe. Use of foundry sand in various engineering applications can solve the problem of disposal of foundry sand and other purposes.Foundry sand consists primarily of silica sand, coated with a thin film of burnt carbon, residual binder (bentonite, sea coal, resins) and dust. Foundry sand can be used in concrete to improve its strength and other durability factors. Foundry Sand can be used as a partial replacement of cement or as a partial replacement of fine aggregates or total replacement of fine aggregate and as supplementary addition to achieve different properties of concrete.In the present study, effect of foundry sand as fine aggregate replacement on the compressive strength, of concrete having mix proportions of 1:1.39:1.69 was investigated. Fine aggregates were replaced with three percentages of foundry sand. The percentages of replacements were 10, 20 and 30 % by weight of fine aggregate. Tests were performed for compressive strength, split tensile strength and modulus of elasticity for all replacement levels of foundry sand at different curing periods (7-days & 28-days)