EARTHWORM AUTO-EARTHQUAKE LOCATION PERFORMANCE AND RECENT IMPROVEMENTS IN SEISMIC DATA ACQUISITION, PROCESSING, ARCHIVING AND

Abstract. The Kandilli Observatory Real-Time Automated Seismic Data Processing System (KORTASDPS) has been one of the most important infrastructure developments in the last 5 years at Kandilli Observatory and Earthquake Research Institute (KOERI), Boğaziçi University. KORTASDPS uses the Earthworm (EW) software suite for its real-time processing of seismic data. Primary functions of EW are to serve as real-time data server and auto-detect and locate earthquakes. Performance evaluation of EW was done by comparing its hypocenter catalogs from years 2004 and 2005 with catalogs produced by the National Earthquake Monitoring Center (NEMC) which relies on manual detection and location techniques. In general EW performance is highest in northwest Turkey where station density and relative station sensitivity are high. Catalog correlations reveal that this area has an estimated 3.1 low magnitude threshold for a 90 % earthquake auto-detection and location reliability. For the rest of the country this low magnitude threshold estimate ranges between 4.4 and 4.6. Three points have been proposed to improve EW auto-detection and location accuracy. These are more accurate timing of emergent phases, use of reliable S phases and an increase in the effective seismic network density with more sensitive and reliable stations. Already expansion and modernization of KOERI’s seismic network in 2004 and 2005 have resulted in clear improvements i