I understand that this thesis may be made publicly available and reproduced by the University of Queensland unless a limited term embargo on publication has been negotiated with a sponsor. Yours sincerely
Titanium and its alloys are susceptible to oxidation when exposed to elevated temperatures and oxyge...
Titanium alloy Ti-6Al-4V was chosen for examination, more specifically, the Properties and Performan...
CS The Society shall not be responsible for statements or opinions advanced in papers or in dis-cuss...
This article appeared in a journal published by Elsevier. The attached copy is furnished to the auth...
The thesis may be consulted by you, provided you comply with the provisions of the Act and the follo...
In an effort to more accurately predict diffusion kinetics of oxygen into titanium during heat-treat...
Nugroho, Aris Widyo. 2013. Investigation of the production and mechanical properties of porous Beta ...
CITATION: Conradie, F. W., Oosthuizen, G. A. & Sacks, N. 2016. Investigating the feasibility to remo...
The copyright of this thesis vests in the author. No quotation from it or information derived from i...
This material is presented to ensure timely dissemination of scholarly and technical work. Copyright...
is an open access repository that collects the work of Arts et Métiers ParisTech researchers and mak...
Your article is protected by copyright and all rights are held exclusively by ASM International. Thi...
This final thesis summarizes the basic information on titanium and its alloys. It describes the mech...
"September 1983"--Cover.Distributed to depository libraries in microfiche.Includes bibliographical r...
This article appeared in a journal published by Elsevier. The attached copy is furnished to the auth...
Titanium and its alloys are susceptible to oxidation when exposed to elevated temperatures and oxyge...
Titanium alloy Ti-6Al-4V was chosen for examination, more specifically, the Properties and Performan...
CS The Society shall not be responsible for statements or opinions advanced in papers or in dis-cuss...
This article appeared in a journal published by Elsevier. The attached copy is furnished to the auth...
The thesis may be consulted by you, provided you comply with the provisions of the Act and the follo...
In an effort to more accurately predict diffusion kinetics of oxygen into titanium during heat-treat...
Nugroho, Aris Widyo. 2013. Investigation of the production and mechanical properties of porous Beta ...
CITATION: Conradie, F. W., Oosthuizen, G. A. & Sacks, N. 2016. Investigating the feasibility to remo...
The copyright of this thesis vests in the author. No quotation from it or information derived from i...
This material is presented to ensure timely dissemination of scholarly and technical work. Copyright...
is an open access repository that collects the work of Arts et Métiers ParisTech researchers and mak...
Your article is protected by copyright and all rights are held exclusively by ASM International. Thi...
This final thesis summarizes the basic information on titanium and its alloys. It describes the mech...
"September 1983"--Cover.Distributed to depository libraries in microfiche.Includes bibliographical r...
This article appeared in a journal published by Elsevier. The attached copy is furnished to the auth...
Titanium and its alloys are susceptible to oxidation when exposed to elevated temperatures and oxyge...
Titanium alloy Ti-6Al-4V was chosen for examination, more specifically, the Properties and Performan...
CS The Society shall not be responsible for statements or opinions advanced in papers or in dis-cuss...