Abstract. The design of the ITER-FEAT vacuum pumping and fuelling systems is supported by two key R&D programs, the first directed towards the development of a steady state tritium compatible pellet injector, and the second towards the development of a supercritical helium cooled cryogenic pump for torus exhaust. While the pellet injector programme for ITER-FEAT is new, that for the cryopump has evolved from a programme that originally supported the 1998 ITER design. As the plasma exhaust parameters have remained essentially unchanged between these two machines, the R&D conducted to date remains valid. Initial test results on the prototype injector, TPI-1, which included continuous injection of Ø3 mm hydrogen pellets at 500 m/s and ...
For tritium processing in JET during the next Deuterium-Tritium-Experiment (DTE2), a fully tritium c...
The Tritium System Test Assembly (TSTA), at the Los Alamos Scientific Laboratory, is intended to dem...
Two vacuum systems were designed and built for the RFQ (Radio Frequency Quadrupole) cavity in the AP...
A reliable but versatile primary cryopumping system is required for high vacuum pumping of the ITER ...
As part of the International Thermonuclear Experimental Reactor (ITER) plasma fueling development pr...
As part of the International Thermonuclear Engineering Reactor (ITER) plasma fueling development pro...
As part of the International Thermonuclear Engineering Reactor (ITER) plasma fueling development pro...
The design of the vacuum pumping system for is discussed, and progress in the research and developme...
Oak Ridge National Laboratory (ORNL) has been developing pellet injection systems for plasma fueling...
AbstractITER is a large experimental tokamak being built to research fusion power. The ITER cryostat...
As part of the International Thermonuclear Engineering Reactor (ITER) plasma fueling development pro...
To study the pump performance of a sorption cryopump intended for use within the ITER fuel cycle, th...
This report is a description of the design and construction of FORTE (Forepumps Test Facility) which...
Im Rahmen des 'European Fusion Technology Programme' werden Arbeiten zur Entwicklung einer Primaerva...
The development of innovative fueling systems in support of magnetic fusion energy, particularly the...
For tritium processing in JET during the next Deuterium-Tritium-Experiment (DTE2), a fully tritium c...
The Tritium System Test Assembly (TSTA), at the Los Alamos Scientific Laboratory, is intended to dem...
Two vacuum systems were designed and built for the RFQ (Radio Frequency Quadrupole) cavity in the AP...
A reliable but versatile primary cryopumping system is required for high vacuum pumping of the ITER ...
As part of the International Thermonuclear Experimental Reactor (ITER) plasma fueling development pr...
As part of the International Thermonuclear Engineering Reactor (ITER) plasma fueling development pro...
As part of the International Thermonuclear Engineering Reactor (ITER) plasma fueling development pro...
The design of the vacuum pumping system for is discussed, and progress in the research and developme...
Oak Ridge National Laboratory (ORNL) has been developing pellet injection systems for plasma fueling...
AbstractITER is a large experimental tokamak being built to research fusion power. The ITER cryostat...
As part of the International Thermonuclear Engineering Reactor (ITER) plasma fueling development pro...
To study the pump performance of a sorption cryopump intended for use within the ITER fuel cycle, th...
This report is a description of the design and construction of FORTE (Forepumps Test Facility) which...
Im Rahmen des 'European Fusion Technology Programme' werden Arbeiten zur Entwicklung einer Primaerva...
The development of innovative fueling systems in support of magnetic fusion energy, particularly the...
For tritium processing in JET during the next Deuterium-Tritium-Experiment (DTE2), a fully tritium c...
The Tritium System Test Assembly (TSTA), at the Los Alamos Scientific Laboratory, is intended to dem...
Two vacuum systems were designed and built for the RFQ (Radio Frequency Quadrupole) cavity in the AP...