Add to ORKGWe are developing a pulsed power supply (Modulator) to power a 10 MW Klystron [Model 2KHY-111B of TORIY, Russia]. The power supply is required to deliver a 69 kV, 355 A pulse of 10 µs duration at a repetition rate of 40 Hz. We discuss here the design of the pulsed modulator, and the various schemes being employed to develop its various sub-systems
The design goals for new Klystrons are governed by the rf power needs and efficiency requirements of...
XFEL/SPring-8 employs 72 units of the pulse modulator power supplies in order to drive the pulse pow...
The development of adequate modulators for high peak power klystrons is one of the focus points for ...
We are developing a pulsed power supply (Modulator) to power a 10 MW Klystron [Model 2KHY-111B of TO...
The design and test results of the Pulse Transformer (PT) for the klystron with a voltage of 120 kV,...
A solid state pulsed power generator rated at 100 kV, 2 MWpeak, 0.8 ms/2 Hz suited for klystrons cat...
We propose a new concept of pulsed modulator. The modulator supplies 114 MW peak power at 60 pps max...
A new Klystron modulator is to be developed as a part of the new Linear Accelerator (LINAC4) project...
A new Klystron modulator is to be developed as a part of the new Linear Accelerator (LINAC4) project...
A new Klystron modulator is to be developed as a part of the new Linear Accelerator (LINAC4) project...
An X-band Klystron Modulator has been designed and constructed to drive two kinds of prototype X-ban...
An 190MW compact pulse modulator is constructed to test spare 80MW S-band klystrons ( E3712 TOSHIBA)...
The Solid State Induction type modulator was developed at KEK for the JLC project. This modulator wa...
The Solid State Induction type modulator was developed at KEK for the JLC project. This modulator wa...
Hardware R&D on C-band (5712 MHz) RF-system for an electron/positron linear collider started in ...
The design goals for new Klystrons are governed by the rf power needs and efficiency requirements of...
XFEL/SPring-8 employs 72 units of the pulse modulator power supplies in order to drive the pulse pow...
The development of adequate modulators for high peak power klystrons is one of the focus points for ...
We are developing a pulsed power supply (Modulator) to power a 10 MW Klystron [Model 2KHY-111B of TO...
The design and test results of the Pulse Transformer (PT) for the klystron with a voltage of 120 kV,...
A solid state pulsed power generator rated at 100 kV, 2 MWpeak, 0.8 ms/2 Hz suited for klystrons cat...
We propose a new concept of pulsed modulator. The modulator supplies 114 MW peak power at 60 pps max...
A new Klystron modulator is to be developed as a part of the new Linear Accelerator (LINAC4) project...
A new Klystron modulator is to be developed as a part of the new Linear Accelerator (LINAC4) project...
A new Klystron modulator is to be developed as a part of the new Linear Accelerator (LINAC4) project...
An X-band Klystron Modulator has been designed and constructed to drive two kinds of prototype X-ban...
An 190MW compact pulse modulator is constructed to test spare 80MW S-band klystrons ( E3712 TOSHIBA)...
The Solid State Induction type modulator was developed at KEK for the JLC project. This modulator wa...
The Solid State Induction type modulator was developed at KEK for the JLC project. This modulator wa...
Hardware R&D on C-band (5712 MHz) RF-system for an electron/positron linear collider started in ...
The design goals for new Klystrons are governed by the rf power needs and efficiency requirements of...
XFEL/SPring-8 employs 72 units of the pulse modulator power supplies in order to drive the pulse pow...
The development of adequate modulators for high peak power klystrons is one of the focus points for ...