Add to ORKGThe existing klystron modulator in the Linac use a 60 Hz high voltage power supply and adopt traditional L-C resonant charging scheme with De-Qing circuit. The stability of the output high voltage is not satisfactory especially when the AC line voltage fluctuations. If an inverter power supply is used as a HV generator, it will just meet the demands A high frequency inverter switching makes the overall system size small. The command-charging feature can guarantee the high reliability of switching function. In order to increase the stability, operating reliability and comply with the PLC (programming logic controller) and touch screen control system of PLS, an upgrading works is now in progress. This paper will discuss some inverter power su...
Major changes to the Next Linear Collider (NLC) design were facilitated by the experimental testing ...
The 2-GeV electron linac at Pohang accelerator laboratory (PAL) has been operated continuously as a ...
High-duty-cycle line-type pulse modulator has been developed to drive 5.5 MW S-band klystron at 700 ...
The klystrons at the S-band test facility at DESY require high voltage pulses of 550kV at a flat top...
The klystrons at the S-band test facility at DESY require high voltage pulses of 550kV at a flat top...
There are many general requirements for colliders, such as high reliability and availability, reason...
There are many general requirements for colliders, such as high reliability and availability, reason...
A novel Stacked Multi-Level (SML) modulator topology optimized for long pulse and high average power...
The SLAC National Accelerator Laboratory employs 244 klystron modulators on its two-mile-long linear...
In order to generate high voltage high pulsed power, klystron modulators necessarily contain at leas...
We propose a new concept of pulsed modulator. The modulator supplies 114 MW peak power at 60 pps max...
The APS linac beam energy must be stable to within {+-}1% to match the energy acceptance of the posi...
A Marx-topology klystron modulator is under development for the International Linear Collider (ILC) ...
The 2-GeV electron linac at Pohang accelerator laboratory (PAL) has been operated continuously as a ...
Advances in power electronic components make feasible the production of switch-mode power converters...
Major changes to the Next Linear Collider (NLC) design were facilitated by the experimental testing ...
The 2-GeV electron linac at Pohang accelerator laboratory (PAL) has been operated continuously as a ...
High-duty-cycle line-type pulse modulator has been developed to drive 5.5 MW S-band klystron at 700 ...
The klystrons at the S-band test facility at DESY require high voltage pulses of 550kV at a flat top...
The klystrons at the S-band test facility at DESY require high voltage pulses of 550kV at a flat top...
There are many general requirements for colliders, such as high reliability and availability, reason...
There are many general requirements for colliders, such as high reliability and availability, reason...
A novel Stacked Multi-Level (SML) modulator topology optimized for long pulse and high average power...
The SLAC National Accelerator Laboratory employs 244 klystron modulators on its two-mile-long linear...
In order to generate high voltage high pulsed power, klystron modulators necessarily contain at leas...
We propose a new concept of pulsed modulator. The modulator supplies 114 MW peak power at 60 pps max...
The APS linac beam energy must be stable to within {+-}1% to match the energy acceptance of the posi...
A Marx-topology klystron modulator is under development for the International Linear Collider (ILC) ...
The 2-GeV electron linac at Pohang accelerator laboratory (PAL) has been operated continuously as a ...
Advances in power electronic components make feasible the production of switch-mode power converters...
Major changes to the Next Linear Collider (NLC) design were facilitated by the experimental testing ...
The 2-GeV electron linac at Pohang accelerator laboratory (PAL) has been operated continuously as a ...
High-duty-cycle line-type pulse modulator has been developed to drive 5.5 MW S-band klystron at 700 ...