Solute transport in unsaturated soil: Experimental design, parameter estimation, and model discrimination. Soil

The objectives of this study were to: (i) examine the efficacy of two sampling techniques for characterizing solute transport under steady-state water flow, (ii) study the variation in transport model parameters with increasing depth of solute leaching, and (iii) perform model discrimination to examine the transport process operative within a field plot. Bromide, NO?, and Cl- were applied sequentially to a plot instrumented with two sets of 12 solution samplers located at depths of 0.25 and 0.65 m. At the conclusion of the experiment we destructively sampled the entire 2.0 by 2.0 m plot to a depth of 2.0 m. Mass recovery by the solution samplers ranged from 63 to 83 % for the three tracers, and recovery by soil excavation ranged from 96 to 105%. The mean solute velocity estimated with the solution sampler data was significantly less than that determined by soil excavation. Mean solute velocity determined from soil excavation implied an effec-tive transport volume equal to 0.828, (where 8, is volumetric water content) for the three tracers. Solution samplers and soil excavation provided similar measures of vertical dispersion. Both sampling meth-ods revealed a scale-dependent dispersion process in which the disper-sivity increased linearly with mean residence time. The depth profiles for all three solutes were accurately described with a stochastic convec-tive lognormal transfer function model (CLT) using the applied mass and two constant parameters (estimated from simultaneous fitting to the depth profiles)