Ground motion and vibration can be a limiting factor in the performance of future linear colliders. Investigations of ground motion have been carried out around the world for several decades. In this review, results of recent investigations of ground motion as well as ongoing developments of stabilization methods are presented. 1 GROUND MOTION STUDIES Ground motion can conveniently be divided into fast and slow when studying its effect on a linear collider. Fast motion (f> a few Hz) cannot be adequately corrected by a pulse-to-pulse feedback operating at the repetition rate of the collider and therefore primarily causes beam offsets at the IP. Slow motion can be compensated by feedback and thus results only in beam emittance growth
CLIC is a proposal of CERN for a future high-energy particle collider. CLIC will collide electron an...
International audienceWithout counter measures, ground motion effects would deteriorate the performa...
The International Linear Collider (ILC), as described in its Technical Design Report (TDR), must mai...
Ground motion and vibration can be a limiting factor in the performance of future colliders, in part...
Ground motion is a severe problem for many particle accelerators, since it excites beam oscillations...
The performance of high energy linear colliders depends critically on the stability with which they ...
The performance of high energy linear colliders depends critically on the stability with which they ...
To fully characterize the luminosity performance of a linear collider, it is important to simulate t...
Beam-based feedback systems play an essential role in the operation of high energy electron-positron...
The future TeV linear collider should have extremely small beam emittance to achieve the required lu...
To keep the two beams of linear colliders in collision, the beam offset with respect to each other s...
The power spectrum density and coherence function for slow ground motions are studied for the constr...
Understanding slow and fast ground motion is important for the successful operation and design for p...
Optimization of the parameters of a future linear collider requires comprehensive models of ground m...
Ground motion may be a limiting factor in the performance of future linear colliders. Cultural noise...
CLIC is a proposal of CERN for a future high-energy particle collider. CLIC will collide electron an...
International audienceWithout counter measures, ground motion effects would deteriorate the performa...
The International Linear Collider (ILC), as described in its Technical Design Report (TDR), must mai...
Ground motion and vibration can be a limiting factor in the performance of future colliders, in part...
Ground motion is a severe problem for many particle accelerators, since it excites beam oscillations...
The performance of high energy linear colliders depends critically on the stability with which they ...
The performance of high energy linear colliders depends critically on the stability with which they ...
To fully characterize the luminosity performance of a linear collider, it is important to simulate t...
Beam-based feedback systems play an essential role in the operation of high energy electron-positron...
The future TeV linear collider should have extremely small beam emittance to achieve the required lu...
To keep the two beams of linear colliders in collision, the beam offset with respect to each other s...
The power spectrum density and coherence function for slow ground motions are studied for the constr...
Understanding slow and fast ground motion is important for the successful operation and design for p...
Optimization of the parameters of a future linear collider requires comprehensive models of ground m...
Ground motion may be a limiting factor in the performance of future linear colliders. Cultural noise...
CLIC is a proposal of CERN for a future high-energy particle collider. CLIC will collide electron an...
International audienceWithout counter measures, ground motion effects would deteriorate the performa...
The International Linear Collider (ILC), as described in its Technical Design Report (TDR), must mai...