The new positive ion injector PIAVE for the ALPI Complex upgrading is under construction. The aim of the injector is to accelerate ions with masses up to 238 and mass over charge ratio up to 8.5 from 0.04 to 1 MeV/u. The chosen structures are two superconducting RFQ's operating at 80 MHz, followed by 8 QWR's at the same frequency. The paper will discuss the main design choices and technological challenges. At present many components have already been built and the first generation prototypes of the cavities are under test.
The new injector PIAVE (Positive Ion Accelerator for Very low Energy) will use two bulk niobium (Nb)...
The accelerator facilities at the Max-Planck-Institut für Kernphysik in Heidelberg will be upgraded ...
The SPES (Selective Production of Exotic Species) project for a national exotic beam facility in Leg...
The new positive ion injector for the ALPI Complex upgrading has been founded and is in its design p...
The commissioning of the new PIAVE injector for the superconducting linac ALPI is approaching its co...
A full-Nb superconducting RFQ was completed and tested at liquid helium temperature at INFN-Laborato...
Superconducting RFQs (SRFQs), the first SC RFQs ever made operational for users, have been operated ...
Many superconducting rf activities are being pursued at LNL for present and future projects: the ALP...
The low-β section of the PIAVE-ALPI superconducting linac is being upgraded in order to increase its...
The tests on the stainless steel prototype for one of the two superconducting RFQs (SRFQs) for PIAVE...
The PIAVE superconducting linac is not only made of rfqs; 8 low β superconducting quarter wave reson...
The installation of the p = 0.11 section of the linac ALPI is to be completed within 1992. This sect...
The superconducting linac ALPI at INFN-LNL is composed of 20 identical cryostats housing, at a group...
The accelerator complex of Laboratori Nazionali di Legnaro is made by a super-conducting booster, AL...
Characterized by its compactness, convenience, high current and high transmission, radio frequency q...
The new injector PIAVE (Positive Ion Accelerator for Very low Energy) will use two bulk niobium (Nb)...
The accelerator facilities at the Max-Planck-Institut für Kernphysik in Heidelberg will be upgraded ...
The SPES (Selective Production of Exotic Species) project for a national exotic beam facility in Leg...
The new positive ion injector for the ALPI Complex upgrading has been founded and is in its design p...
The commissioning of the new PIAVE injector for the superconducting linac ALPI is approaching its co...
A full-Nb superconducting RFQ was completed and tested at liquid helium temperature at INFN-Laborato...
Superconducting RFQs (SRFQs), the first SC RFQs ever made operational for users, have been operated ...
Many superconducting rf activities are being pursued at LNL for present and future projects: the ALP...
The low-β section of the PIAVE-ALPI superconducting linac is being upgraded in order to increase its...
The tests on the stainless steel prototype for one of the two superconducting RFQs (SRFQs) for PIAVE...
The PIAVE superconducting linac is not only made of rfqs; 8 low β superconducting quarter wave reson...
The installation of the p = 0.11 section of the linac ALPI is to be completed within 1992. This sect...
The superconducting linac ALPI at INFN-LNL is composed of 20 identical cryostats housing, at a group...
The accelerator complex of Laboratori Nazionali di Legnaro is made by a super-conducting booster, AL...
Characterized by its compactness, convenience, high current and high transmission, radio frequency q...
The new injector PIAVE (Positive Ion Accelerator for Very low Energy) will use two bulk niobium (Nb)...
The accelerator facilities at the Max-Planck-Institut für Kernphysik in Heidelberg will be upgraded ...
The SPES (Selective Production of Exotic Species) project for a national exotic beam facility in Leg...