evidence of a triaxial tensile failure mechanism

The mechanism for nucleation phenomenon in solid-state microcellular foams is identified as a solid-state failure process. This process originates at internal flaws within the gas-polymer matrix, where it is induced by the presence of a state of hydrostatic tensile stress within the polymer matrix. The hydrostatic tensile stress is caused by the presence of the saturating gas within the polymer. The nucleation phenomenon is thermally activated at the effective glass transition temperature of the gas-polymer mixture. At this critical temperature, the hydrostatic tensile stress within the gas-polymer mixture is sufficient to cause the polymer matrix to fail, thereby creating a foam cell nucleus. In general, the nucleation sites are observed to be flat, approximately circular, fracture sites. After the appearance of the initial fracture, gas diffuses from the gas-polymer matrix into the fracture. The fracture seam inflates during the growth process, in which growth begins with the appearance of a disk shaped fracture and concludes with an approximately spherical cell. The results and conclusions presented herein suggest a new avenue to explain the cell nucleation phenomena observed in this process. C ° 1999 Kluwer Academic Publishers Nomenclature T temperature of the specimen (–C) Tg;eff effective glass transition temperature (–C) Tn nucleation threshold temperature (–C) C gas concentration within the polymer specimen (mg/mg) Cini initial gas concentration level of the gas-polymer mixture (mg (gas)/mg (polymer)) 1V change in polymer volume due to the presence of the saturating gas (m3) V0 initial volume of the polymer volume prior to gas saturation (m3) Subscripts: net the net dilation strain due to internal and external hydrostatic stresses HT hydrostatic tension HC hydrostatic compression H hydrostatic stress 1