Mean Velocity and Moments of Turbulent Velocity Fluctuations in the Wake of a Model Ship Propulsor

Abstract Pod drives are modern outboard ship propulsion systems with a motor encapsulated in a watertight pod. The motor’s shaft is connected directly to one or two propellers. The whole unit hangs from the stern of the ship and rotates azimuthally, thus providing thrust and steering without the need of a rudder. Force/momentum and phase-resolved LDA measurements were performed for inline co-rotating and contra-rotating propellers pod drive models (see figure 1). The measurements permitted to characterize these ship propulsion systems in terms of their hydrodynamic characteristics. The torque delivered to the propellers and the thrust of the system were measured for different operation conditions of the propellers. These measurements lead to the hydrodynamic optimization of the ship propulsion system. The parameters under focus revealed the influence of distance between propeller planes, propellers ’ frequency of rotation ratio and type of propellers (co- or contra-rotating) for the overall efficiency of the system. Two of the ship propulsion systems under consideration were chosen, based on their hydrodynamic characteristics, for a detailed study of the swirling wake flow by means of laser Doppler anemometry. A two-component laser Doppler system was employed for the velocity measurements. A light barrier mounted on the axle of the rear propeller motor supplied a TTL signal to mark the beginning of each period, thus providing angle information for the LDA measurements. Measurements were conducted for four axia