Abstract: With a goal to obtain information on rate of the high explosive decomposition and equation of state of the HE formulations and detonation products, measurements of the pressure and particle velocity profiles of shock and detonation waves have been performed for pure coarse-grain and fine-grain HMX and for the HMX+16.4 % boron mixture. For these measurements, the manganin pressure gauges and the laser Doppler velocimeter VISAR were applied. Effect of boron in the energy release process was observed both in the detonation and shock-wave initiation regimes
The authors have used an embedded electromagnetic particle velocity gauge technique to measure the s...
The authors present results of determination of sound velocities in explosion products (EP) of HMX-b...
Experimental measurements using nanosecond time resolved embedded gauges and laser interferometric t...
Detonation wave profiles have been measured in several HMX based plastic bonded explosives including...
Boron powder is an additive for metalized explosives with great application potential. To improve th...
To obtain reaction zone parameters for several high explosives, experimental measurements of the det...
The laser interferometric system VISAR was used to investigate the detonation waves structure of pre...
The detonation products of high explosives are dependent on pressure and also on the confinement und...
Shock initiation measurements have been made on granular HMX (octotetramethylene tetranitrainine) fo...
The report presented contains the brief description of some of the macrokinetic dependencies in fiel...
We have used an embedded electromagnetic particle velocity gauge technique to measure the shock init...
The combustion of boron-contg. propellants, based on AP/GAP and AP/HMX/GAP formulations, was investi...
We measure the Laminar burn rates of explosives at extreme conditions (up to 520K and 1 GPa) in a hy...
One of the reasons for building our gas-driven two-stage gun at Los Alamos was to be able to do shoc...
High pressure deflagration rate measurements of a unique ammonium perchlorate (AP) based propellant ...
The authors have used an embedded electromagnetic particle velocity gauge technique to measure the s...
The authors present results of determination of sound velocities in explosion products (EP) of HMX-b...
Experimental measurements using nanosecond time resolved embedded gauges and laser interferometric t...
Detonation wave profiles have been measured in several HMX based plastic bonded explosives including...
Boron powder is an additive for metalized explosives with great application potential. To improve th...
To obtain reaction zone parameters for several high explosives, experimental measurements of the det...
The laser interferometric system VISAR was used to investigate the detonation waves structure of pre...
The detonation products of high explosives are dependent on pressure and also on the confinement und...
Shock initiation measurements have been made on granular HMX (octotetramethylene tetranitrainine) fo...
The report presented contains the brief description of some of the macrokinetic dependencies in fiel...
We have used an embedded electromagnetic particle velocity gauge technique to measure the shock init...
The combustion of boron-contg. propellants, based on AP/GAP and AP/HMX/GAP formulations, was investi...
We measure the Laminar burn rates of explosives at extreme conditions (up to 520K and 1 GPa) in a hy...
One of the reasons for building our gas-driven two-stage gun at Los Alamos was to be able to do shoc...
High pressure deflagration rate measurements of a unique ammonium perchlorate (AP) based propellant ...
The authors have used an embedded electromagnetic particle velocity gauge technique to measure the s...
The authors present results of determination of sound velocities in explosion products (EP) of HMX-b...
Experimental measurements using nanosecond time resolved embedded gauges and laser interferometric t...