Add to ORKGAbstract. High purity Fe-50rnass%Cr alloys containing (C+N) in the range of 30 to 500 mass pprn were prepad and their corrosion resistance was investigated. Pitting potential in a 3.5mass%NaCl solution at 343K rose with reducing (C+N) content. Alloys containing (C+N) at less than 100 mass ppm did not sustain pitting corrosion. However, alloys containing 500 mass ppm (C+N) corroded severely in 6%FeC13+1/20N HCI solutions. Heat treatment at 923K was recognized as influencing corrosion resistance due to precipitation of carbonitrides only in the case of the alloy containing 500 mass ppm (C+N). 1
Effects of chromium and manganese as alloying elements on corrosion resistance of carbon steel were ...
In order to evaluate the corrosion resistivity of amorphous iron alloys which have been characterize...
Oxidation and atmospheric corrosion data suggest that addition of Cr provides the greatest improveme...
The effects of carbon on general and pitting corrosion behaviour of Fe-18Cr-10Mn-(0.33-0.44)N-(0-0.3...
In this study, the resistance to pitting corrosion of Fe-18Cr-9Mn-5.5Ni-0.3(C + N) austenitic stainl...
The corrosion behaviors of the as-quenched austenitic Fe-9%Al-30%Mn-(3,5,6.5,8)%Cr-1%C (in mass%) al...
Using high purity iron-chromium alloys with 30 to 60 mass % Cr, which had been hardly produced becau...
The corrosion resistance of amorphous iron alloys, whose practical application is expected because o...
Fe-(9, 19, 28, 37) wt. %Cr alloys were corroded at 700 and 800 °C for 70 h under 1 atm of N2, 1 atm ...
The pitting resistance of a series of experimental stainless steels with varying amounts of nickel, ...
Materials with improved corrosion resistance are needed for use in processing equipment handling HNO...
Tests indicate that of the various alloys tssted for corrosion resistance when exposed 10 an HF-HP a...
International audiencePast and current gas-cooled nuclear reactors rely on CO2-rich gases as a coola...
Hardfacing alloys are weld deposited on a base material to provide a wear resistant surface. Commerc...
In this investigation, three different chemical compositions of Fe-Cr-C alloys were fabricated on AI...
Effects of chromium and manganese as alloying elements on corrosion resistance of carbon steel were ...
In order to evaluate the corrosion resistivity of amorphous iron alloys which have been characterize...
Oxidation and atmospheric corrosion data suggest that addition of Cr provides the greatest improveme...
The effects of carbon on general and pitting corrosion behaviour of Fe-18Cr-10Mn-(0.33-0.44)N-(0-0.3...
In this study, the resistance to pitting corrosion of Fe-18Cr-9Mn-5.5Ni-0.3(C + N) austenitic stainl...
The corrosion behaviors of the as-quenched austenitic Fe-9%Al-30%Mn-(3,5,6.5,8)%Cr-1%C (in mass%) al...
Using high purity iron-chromium alloys with 30 to 60 mass % Cr, which had been hardly produced becau...
The corrosion resistance of amorphous iron alloys, whose practical application is expected because o...
Fe-(9, 19, 28, 37) wt. %Cr alloys were corroded at 700 and 800 °C for 70 h under 1 atm of N2, 1 atm ...
The pitting resistance of a series of experimental stainless steels with varying amounts of nickel, ...
Materials with improved corrosion resistance are needed for use in processing equipment handling HNO...
Tests indicate that of the various alloys tssted for corrosion resistance when exposed 10 an HF-HP a...
International audiencePast and current gas-cooled nuclear reactors rely on CO2-rich gases as a coola...
Hardfacing alloys are weld deposited on a base material to provide a wear resistant surface. Commerc...
In this investigation, three different chemical compositions of Fe-Cr-C alloys were fabricated on AI...
Effects of chromium and manganese as alloying elements on corrosion resistance of carbon steel were ...
In order to evaluate the corrosion resistivity of amorphous iron alloys which have been characterize...
Oxidation and atmospheric corrosion data suggest that addition of Cr provides the greatest improveme...