PRELIMINARY DESIGN OF FAST KICKER SYSTEM FOR BEPC II

With in BEPC II injection system there are two sets injection lines in storage ring each consisting of a pair of kicker magnets and one Lambertson magnet for e+ and e-injection respectively. The incoming beam is injected horizontally inside the storage ring. The linac provides the short pulsed bunch train of 3 micro bunches. There are six e+ and six e-- bunch trains countermove in a same ring. The single bunch train injection is chosen. The duration of bunch train is 16ns. The kick of field is 130 Gauss-meter. The type of lumped ferrite inductance magnet with ceramic vacuum chamber is chosen. Per magnet consists of four modules each of 30 cm long, The field strength of magnet is 108 gauss. Excitation current is 631 A.The pulse field of magnet is a trapezoidal wave with duration less than 110ns, rise / fall time of K1 and fall / rise time of K2 is 33ns / 50ns respectively. The lumped LC network with impedance of 30ohm and voltage of 38kV is chosen as a pulser. The stray inductance of lead is controlled to be small enough by an air-insulated coaxial construction. Field rise time is reduced by the compensating capacitance and the fall time is reduced by second switch and saturable reactor. A ZVS PWM type of high voltage power supply is chosen as the charger for PFN. The details are described in this paper