A COST BASED APPROACH TO DESIGN OF RESIDENTIAL STEEL ROOF SYSTEMS

A comprehensive system for the design of residential steel roof truss systems is presented. The research involved three distinct stages. In the first stage, components of the truss systems were tested in order to determine their member properties subjected to axial force and bending moments. Finite element simulations of these tests were carried out to further verify the calculations obtained using the AISI-LRFD code guidelines. The AISI-LRFD code based design curves were used for the actual design, the laboratory experiments and the finite element results provided additional checks and verification of the AISI values. The second stage of the research involved the development of an integrated design system that would automatically design a roof truss given minimal input and using the design curves as the performance constraints. A design optimization scheme based on the genetic algorithm was adopted to handle sizing, shape and topology variables in the design problem. A software system was developed to design the lowest cost truss given the input parameters. The third stage of the research involved full-scale testing of typical residential steel roofs designed using the developed software system. Roof trusses were loaded to failure. The full scale testing procedure established the factor of safety while validatin