An In Vitro Evaluation of ZiReal Abutments with Hexagonal Connection: In Original State and Following Abutment Preparation

ment in contact with the implant head, with potential repercussions for the interface fit. The purpose of this study was to assess changes at the implant interface of high-strength zirconia ceramic esthetic abutments with a hexagonal connection (ZiReal; 3i/Implant Innovations, Palm Beach Gardens, FL) fol-lowing abutment preparation for single-tooth restorations. Materials and Methods: The depth (d) and width (w) of the titanium hexagonal portion of the abutment, the apical diameter of the abutment (D), and the rotational freedom (R) of the abutment were assessed for 20 ZiReal abutments prior to prepa-ration (time 0) and following abutment preparation (time 1) to detect any eventual change of fit of the abutment on the top of the implant hexagon. Results: No significant differences relative to any study parameter (d, w, D, and R) were observed between time 0 and time 1 (P =.9542). Discussion and Conclusions: The hexagonal misfit of the titanium machined ZiReal abutment on the implant hexagon may be implicated in screw joint loosening. The results of this report suggest that if all laboratory steps are carefully observed, changes at the implant/ZiReal abutment do not occur. The maintenance of the original features of the ZiReal abutment may reduce the risk of screw loosening. INT J ORAL MAXILLOFAC IMPLANTS 2005;20:108–114 Key words: abutments, dental implants, esthetics, single-tooth replacemen