Development of the polarimetry with NMR for polarized HD target

In the polarized Hydrogen-Deuteride (HD) target project [1], we plan to measure the double polarization asymmetries for the φ meson photoproduction. High polarization will be obtained by applying high magnetic field (17T) at low temperature (10mK). In the case of proton in HD, the polarization is expected to be 95%. Accurate measurements of the target polarization are essential in this project. With this aim in mind, we are developing the polarimetry with ”steady ” NMR. When the magnetic field (or NMR frequency) is swept, an area of spectrum obtained from steady NMR signal is proportional to the target polarization. As a first step, we have obtained NMR spectra of the liquid H2 to check our NMR system with the single coil method, in which a single coil is used for both transmitter and receiver coils. When the single coil is used, one should construct an electronic circuit so that an rf signal from a transmitter does not mix with a signal from a receiver. Therefore, we used a cancellation circuit which is proposed by Jefferey and Armstrong [2] as shown in Fig. 1(a). We used a cylindrical sample cell made of Stycast1266 with an inner-diameter of 11mm and a length of 28mm as shown in Fig. 1(a). The NMR coil has a saddle shape and covers the whole region of the cell. The H2 sample was liquefied at 17K by ”Storage Cryostat (SC) ” which is a 4He cryostat with a superconducting magnet. The magnetic field was swept from 0.405 to 0.41Tesla and the NMR frequency was fixed at 17.8MHz. Figure 1(b) shows the NMR spectra of the sample cell in which liquid H2 is filled. The NMR spectru