A 2007, ‘Assessment of personal direct-reading dust monitors for the measurements of airborne inhalable dust

The performances of five portable direct-reading dust monitors were investigated in a wind tunnel for a range of industrial dusts and three sizes of aluminium oxide test dust to mainly determine their suitability for measuring the inhalable fraction of airborne dust in workplaces. The instruments tested were Split 2 (SKC Ltd), Sidepak (TSI Inc.), Dataram (Thermo Electron Ltd), PDS-2 (Sibata Scientific Technology Ltd) and the Respicon TM (Hund Ltd). The instru-ments ’ responses were compared with reference dust samplers. These were the IOM sampler for the inhalable fraction and the Casella cyclone sampler for the respirable fraction. All instruments are predominantly responsive to and are designed to measure particles in the respirable size range, although two of the instruments, the Split 2 andRespicon TM, are claimed to be capable of measuring inhalable-sized particles. For the purpose of the tests, major modifications to an existing wind tunnel dust injection system were made to facilitate the generation of uniform concentrations of large inhalable-sized dust particles at low air velocities. Each monitor greatly underestimated the measurement of inhalable concentration for all the dusts tested, although the linearity was good over a wide range of concentrations for any particular size distribution of dust. However, their calibration factors, defined as the rati