Add to ORKGAbstract: Implementation of complex test for electrical machines usually demands special experimental equipments. To meet this end, electrical machines test benchs are designed and constructed. In this system different industrial load characteristic are generated for test machine and its drive using a dynamometer. In this paper an induction motor vector controlled load generator based on torque tracking control method, is proposed as load generator. In this method, a direct power control PWM rectifier, guarantee the four-quadrant operation of dynamometer. For investigation of proposed dynamometer performance, different parts of this system are simulated in SIMULINK/MATLAB and the Simulation results are presented
In machine drive systems, direct current (DC) and alternating current (AC) motors are often used for...
ABSTRACT: This paper explains the performance of the induction motor drive by using vector control t...
In this paper, a test bench setup consisting of a drive motor connected to a dynamometer is modeled ...
Implementation of complicated tests for electrical machines usually demands special experimental set...
The paper describe the device for the testing of the drive machines - the electromotors or the engin...
This thesis is an attempt to examine the area of mechanical load emulation used for Induction motor ...
This paper presents the topology selection, design\ud steps, simulation studies, design verification...
The topic of this thesis involves developing a computer based control and monitoring system for a mo...
AbstractThe paper describes a control strategy for a test bench consisting of a drive under test mec...
Alternating current (AC) induction machines are frequently used in variable speed drives with applic...
Abstract: AC motors (Alternating Current motors) have a simple structure and has higher efficiency t...
AbstractThis paper addresses the design, simulation, commissioning and testing of an electrodynamome...
This work proposes a direct torque control with space vector modulation based on load angle using PI...
A general approach to torque and flux control of an induction motor fed by a voltage-source inverter...
The goal of this master thesis is to derive a model of the induction machine that drives the washing...
In machine drive systems, direct current (DC) and alternating current (AC) motors are often used for...
ABSTRACT: This paper explains the performance of the induction motor drive by using vector control t...
In this paper, a test bench setup consisting of a drive motor connected to a dynamometer is modeled ...
Implementation of complicated tests for electrical machines usually demands special experimental set...
The paper describe the device for the testing of the drive machines - the electromotors or the engin...
This thesis is an attempt to examine the area of mechanical load emulation used for Induction motor ...
This paper presents the topology selection, design\ud steps, simulation studies, design verification...
The topic of this thesis involves developing a computer based control and monitoring system for a mo...
AbstractThe paper describes a control strategy for a test bench consisting of a drive under test mec...
Alternating current (AC) induction machines are frequently used in variable speed drives with applic...
Abstract: AC motors (Alternating Current motors) have a simple structure and has higher efficiency t...
AbstractThis paper addresses the design, simulation, commissioning and testing of an electrodynamome...
This work proposes a direct torque control with space vector modulation based on load angle using PI...
A general approach to torque and flux control of an induction motor fed by a voltage-source inverter...
The goal of this master thesis is to derive a model of the induction machine that drives the washing...
In machine drive systems, direct current (DC) and alternating current (AC) motors are often used for...
ABSTRACT: This paper explains the performance of the induction motor drive by using vector control t...
In this paper, a test bench setup consisting of a drive motor connected to a dynamometer is modeled ...