Add to ORKGAbstract – The thermodynamic investigation of equilibrium in Ti–B–C–О system and borides TiB2 synthesis in vacuum in result of the interaction of appropriate oxides with carbon and various borid-ing components (В4С, B, В2О3) is carried out. Bor-ides layers TiB2 on carbon steel St45 or copper al-loy M1 surface. 1
Possibilities of obtaining and using an intermediate layer for joining of Ti-TiB and austenitic stee...
Abstract – he paper studies how microalloying with amorphous boron (Bam) and zirconia (ZrO2) influ-e...
International audienceA titanium matrix composite reinforced with TiB was produced using powder meta...
Abstract – Thermodynamic analysis of the Ti-B-C-O and Zr-B-C-O systems was carried out with the aim ...
20, 45 under the electron beam heat treating are received and studied. The possible mechanism of lay...
Abstract – Conditions of formation, structure and properties of boride layers on carbonaceous steel ...
Mechanically induced self-propagating reaction synthesis of titanium boride and diboride was investi...
An extreme case reaction, the formation of fine titanium diboride (TiB2) powder by the reduction of ...
This research deals with the synthesis and characterization of titanium diboride (TiB2) from novel c...
The present study is concerned with the microstructural modification and the hardness improvement of...
2.5 mol% Y2O3-stabilised ZrO2 composites with 30 vol.% TiB2 particles, hot pressed in vacuum at 1450...
The standard free energy of formation of titanium boride (TiB2) Was measured by the Electro Motive...
By methods of modern physical metallurgy the analysis of structure phase states of titanium alloy VT...
TiB\u2082\u2010based materials werr produced by the reaction of ferrotitanium and boron powders. The...
The equation of state (EOS) of titanium boride, TiB2, was investigated by in situ X-ray diffraction ...
Possibilities of obtaining and using an intermediate layer for joining of Ti-TiB and austenitic stee...
Abstract – he paper studies how microalloying with amorphous boron (Bam) and zirconia (ZrO2) influ-e...
International audienceA titanium matrix composite reinforced with TiB was produced using powder meta...
Abstract – Thermodynamic analysis of the Ti-B-C-O and Zr-B-C-O systems was carried out with the aim ...
20, 45 under the electron beam heat treating are received and studied. The possible mechanism of lay...
Abstract – Conditions of formation, structure and properties of boride layers on carbonaceous steel ...
Mechanically induced self-propagating reaction synthesis of titanium boride and diboride was investi...
An extreme case reaction, the formation of fine titanium diboride (TiB2) powder by the reduction of ...
This research deals with the synthesis and characterization of titanium diboride (TiB2) from novel c...
The present study is concerned with the microstructural modification and the hardness improvement of...
2.5 mol% Y2O3-stabilised ZrO2 composites with 30 vol.% TiB2 particles, hot pressed in vacuum at 1450...
The standard free energy of formation of titanium boride (TiB2) Was measured by the Electro Motive...
By methods of modern physical metallurgy the analysis of structure phase states of titanium alloy VT...
TiB\u2082\u2010based materials werr produced by the reaction of ferrotitanium and boron powders. The...
The equation of state (EOS) of titanium boride, TiB2, was investigated by in situ X-ray diffraction ...
Possibilities of obtaining and using an intermediate layer for joining of Ti-TiB and austenitic stee...
Abstract – he paper studies how microalloying with amorphous boron (Bam) and zirconia (ZrO2) influ-e...
International audienceA titanium matrix composite reinforced with TiB was produced using powder meta...