Résumé- On décrit ici deux techniques originales, adaptées à l'étude et à l'indentification in-situ de films solides fins, apparaissant au cours de traitements électrochimiques: la spectrophotoélectrochimie (SPEC), c'est-à-dire l'analyse spectrale des courants électrochimiques photogénérés dans le film, d'une part, et d'autre part la spectroscopie Raman, utilisée au cours de l'électrolyse. Ces techniques sont appliquées à l'étude de la passivité du fer. Abstract- Two new techniques, well-suited to the in-situ study and T3entvfTcation of the thin films grown during electrochemical processes are described here: on the one hand the spectrophotoelectrochemistry (SPEC) i.e., the spectral analysis of the ph...
The productions of the thin metallic chalcogenide films are of particular interest for the wide rang...
Spectroscopic and microscopic techniques are complementary to electrochemical studies because electr...
In-situ Raman spectra of the passive oxide film in neutral borate solution at pH 8.4 was measured wi...
On décrit ici deux techniques originales, adaptées à l'étude et à l'identification in-situ de films ...
Thesis (Ph. D.)--University of Washington, 1997This work presents the construction and application o...
Raman spectroscopy is a particularly useful technique for studying electrochemical surface reactions...
Surface-enhanced Raman spectroscopy has almost been restricted to the study of only three noble meta...
The research which will be presented on the combination of Raman spectroscopy with an ultrahigh vacu...
Electrochemical impedance spectroscopy (EIS) leads to information on electrochemical kinetics mechan...
Although a passive film is crucial for the corrosion protection of many metals and alloys, this film...
On décrit l'utilisation de la spectroscopie de réflectance in situ pour l'étude d'électrodes nues ou...
The application of the technique of Raman spectroscopy to the study of electrode surfaces is describ...
In situ Raman spectroscopy was conducted on thin film electrodes of Li1-xCoO2 and Li1-xMn2O4 in orde...
The development of a new device based on the use of UV–vis bare optical fibers in a long optical pat...
Corrosion properties of bulk materials coated with thin protective films are not only dependent on t...
The productions of the thin metallic chalcogenide films are of particular interest for the wide rang...
Spectroscopic and microscopic techniques are complementary to electrochemical studies because electr...
In-situ Raman spectra of the passive oxide film in neutral borate solution at pH 8.4 was measured wi...
On décrit ici deux techniques originales, adaptées à l'étude et à l'identification in-situ de films ...
Thesis (Ph. D.)--University of Washington, 1997This work presents the construction and application o...
Raman spectroscopy is a particularly useful technique for studying electrochemical surface reactions...
Surface-enhanced Raman spectroscopy has almost been restricted to the study of only three noble meta...
The research which will be presented on the combination of Raman spectroscopy with an ultrahigh vacu...
Electrochemical impedance spectroscopy (EIS) leads to information on electrochemical kinetics mechan...
Although a passive film is crucial for the corrosion protection of many metals and alloys, this film...
On décrit l'utilisation de la spectroscopie de réflectance in situ pour l'étude d'électrodes nues ou...
The application of the technique of Raman spectroscopy to the study of electrode surfaces is describ...
In situ Raman spectroscopy was conducted on thin film electrodes of Li1-xCoO2 and Li1-xMn2O4 in orde...
The development of a new device based on the use of UV–vis bare optical fibers in a long optical pat...
Corrosion properties of bulk materials coated with thin protective films are not only dependent on t...
The productions of the thin metallic chalcogenide films are of particular interest for the wide rang...
Spectroscopic and microscopic techniques are complementary to electrochemical studies because electr...
In-situ Raman spectra of the passive oxide film in neutral borate solution at pH 8.4 was measured wi...