CEBAF-ER: EXTENDING THE FRONTIER OF ENERGY RECOVERY AT JEFFERSON LAB*

A successful GeV scale energy recovery demonstration with a high ratio of peak-to-injection energies (50:1) was recently carried out on the CEBAF (Continuous Electron Beam Accelerator Facility) recirculating superconducting linear accelerator in an effort to address issues related to beam quality preservation in a large scale energy recovery system. To gain a quantitative understanding of the beam behavior through the machine, an intense effort was made to characterize the 6D phase space during the CEBAF-ER (CEBAF with Energy Recovery) experimental run. A scheme was implemented to measure the transverse emittance of the energy recovered beam prior to being sent to the dump, as well as in the injector and in each arc. The emittance provides a figure of merit in this context inasmuch as it characterizes the extent to which beam quality is preserved during energy recovery. In addition to describing the transverse phase space, the momentum spread was measured in the injector and arcs to characterize the longitudinal phase space. Measurements also included the RF system’s response to the energy recovery process. And by using a novel technique employing wire scans in conjunction with PMTs (Photomultiplier Tubes) to accurately measure the beam profile at the dump, we can qualitatively characterize beam preservation through the recirculator. One of the salient conclusions from the experiment is that the energy recovery process does not contribute to the emittance degradation since the emittance of the recirculating pass is consistent with that of the accelerating pass