Phonon cooled hot electron bolometers (HEB) show smaller noise temperatures in mixer applications above 1THz compared to Schottky diodes or SIS devices. To determine the optimal bias point for maximum IF bandwidth and lowest noise of a FEB detailed understandin g of the current-voltage characteristic is indispensable. A complete nonlinear model for a hot electron bolometric (HEB) mixer is derived. The dynamic resistance of a superconducting film is calculated under stron g demagnetization conditions. The resistance is modeled due to vortex flow and phase slip lines. Self heating gives rise to normal domains in the film. In addition the resistance due to thermally activated flux creep and thermal fluctuations is taken into account. All these...
Hot-electron bolometer devices, used successfully in low noise heterodyne mixing at frequencies up t...
International audienceWe report on the investigation of optimal bias region of a wide-band supercond...
We present the measurements and the theoretical model on the frequency dependent noise temperature o...
Abstract — A hot spot mixer model for phonon cooled hot electron bolometers is set up to accurately ...
The superconducting HEB device is so far the most promising low noise mixer in the THz frequency ran...
A new theoretical model is introduced to describe heterodyne mixer conversion efficiency and noise (...
A new theoretical model is introduced to describe heterodyne mixer conversion efficiency and noise (...
NbN hot electron bolometer (HEB) mixers are at this moment the best heterodyne detectors for frequen...
LGEP 2014 ID = 1596International audienceHigh-TC superconducting (HTS) hot electron bolometers (HEB)...
LGEP 2014 ID = 1525International audienceHigh-TC hot electron bolometers (HEB) are promising THz mix...
The intermediate frequency (IF) characteristics, the frequency dependent IF impedance, and the mixer...
A noise bandwidth (NBW) of 6-7 GHz was obtained for Hot-Electron Bolometer (HEB) mixers made of 10 n...
Hot-Electron Bolometer (HEB) mixers are a complex multi-layer thin film structure containing an ult...
We present a new model for the description of the resistive transition of Nb diffusion-cooled hot el...
Hot-electron bolometer devices, used successfully in low noise heterodyne mixing at frequencies up t...
International audienceWe report on the investigation of optimal bias region of a wide-band supercond...
We present the measurements and the theoretical model on the frequency dependent noise temperature o...
Abstract — A hot spot mixer model for phonon cooled hot electron bolometers is set up to accurately ...
The superconducting HEB device is so far the most promising low noise mixer in the THz frequency ran...
A new theoretical model is introduced to describe heterodyne mixer conversion efficiency and noise (...
A new theoretical model is introduced to describe heterodyne mixer conversion efficiency and noise (...
NbN hot electron bolometer (HEB) mixers are at this moment the best heterodyne detectors for frequen...
LGEP 2014 ID = 1596International audienceHigh-TC superconducting (HTS) hot electron bolometers (HEB)...
LGEP 2014 ID = 1525International audienceHigh-TC hot electron bolometers (HEB) are promising THz mix...
The intermediate frequency (IF) characteristics, the frequency dependent IF impedance, and the mixer...
A noise bandwidth (NBW) of 6-7 GHz was obtained for Hot-Electron Bolometer (HEB) mixers made of 10 n...
Hot-Electron Bolometer (HEB) mixers are a complex multi-layer thin film structure containing an ult...
We present a new model for the description of the resistive transition of Nb diffusion-cooled hot el...
Hot-electron bolometer devices, used successfully in low noise heterodyne mixing at frequencies up t...
International audienceWe report on the investigation of optimal bias region of a wide-band supercond...
We present the measurements and the theoretical model on the frequency dependent noise temperature o...