Add to ORKGAbstract. AFM techniques were used to investigate the microstructure, internal grain structure and intergrain interfaces of zirconia nanostructured ceramics sintered from green compacts being compacted by the common uniaxial dry compacting of nanopowders and under powerful ultrasound action. It was confirmed an essential influence of nanopowder compacting conditions on microstructure of sintered ceramics
Ceramic nanocomposites are attracting growing interest, thanks to new processing methods enabling th...
This paper reports on the mechanical properties and material behavior of pre-sintered zirconia using...
The processing of ceramic nanopowders into components has been investigated via a series of research...
Abstract. Zirconia nanoparticles (stabilized by 1.5 and 3 mol. % of yttria) with particle size below...
This paper reports an investigation of the influence of powerful ultrasonic action during compaction...
The microstructure of various ceramic materials was investigated using scanning at. force microscopy...
Ground surfaces of alumina (Al203), silicon infiltrated silicon carbide (SiSiC) and pressureless sin...
The aim of this work was to study nanostructured powders based on ZrO2 and analyzing the properties ...
Abstract. Nano ceramics possesses excellent mechanical property and physical characteristics in cont...
The term nanoceramics is well known in the ceramic field for at least two decades. Even though there...
156 p.Ultrafine grained ceramic components, which are normally obtained by sintering nano-sized powd...
A porous ceramics obtained from ultra-fine powders has been studied. The porosity of ceramic samples...
The topic of the Ph.D. thesis was focused on the process of sintering alumina and zirconia ceramic m...
Ceramics are increasingly used as structural materials with biomedical applications due to their mec...
ductile grinding depth. Abstract. Nano ceramics possessed ascendant mechanical property and physical...
Ceramic nanocomposites are attracting growing interest, thanks to new processing methods enabling th...
This paper reports on the mechanical properties and material behavior of pre-sintered zirconia using...
The processing of ceramic nanopowders into components has been investigated via a series of research...
Abstract. Zirconia nanoparticles (stabilized by 1.5 and 3 mol. % of yttria) with particle size below...
This paper reports an investigation of the influence of powerful ultrasonic action during compaction...
The microstructure of various ceramic materials was investigated using scanning at. force microscopy...
Ground surfaces of alumina (Al203), silicon infiltrated silicon carbide (SiSiC) and pressureless sin...
The aim of this work was to study nanostructured powders based on ZrO2 and analyzing the properties ...
Abstract. Nano ceramics possesses excellent mechanical property and physical characteristics in cont...
The term nanoceramics is well known in the ceramic field for at least two decades. Even though there...
156 p.Ultrafine grained ceramic components, which are normally obtained by sintering nano-sized powd...
A porous ceramics obtained from ultra-fine powders has been studied. The porosity of ceramic samples...
The topic of the Ph.D. thesis was focused on the process of sintering alumina and zirconia ceramic m...
Ceramics are increasingly used as structural materials with biomedical applications due to their mec...
ductile grinding depth. Abstract. Nano ceramics possessed ascendant mechanical property and physical...
Ceramic nanocomposites are attracting growing interest, thanks to new processing methods enabling th...
This paper reports on the mechanical properties and material behavior of pre-sintered zirconia using...
The processing of ceramic nanopowders into components has been investigated via a series of research...