Add to ORKGAbstract.- The oxidation kinetics of two metallic glasses have been studied by ellipsometry and Auger Electron spectroscopy. We have found that the presence of chromium in Fe based alloys has a marked influence on the thickness of corrosion film formed and on the kinetics of film formation. INTRODUCTION measured after various exposures to the high Several authors have reported that amorphous iron based alloys containing more than 8X chromium exhibit extremely high corrosion resistance in neutral and acid solutions ( I). The high corro
The pitting corrosion behavior of melt spun ribbon made at a wheel speed of 20 ms in 3.5 wt% NaCl so...
The high-temperature oxidation rate of Fe-26 Cr alloys proved highly sensitive to the method of surf...
The high temperature oxidation of iron-based alloys is a crucial factor in limiting the lifetime of ...
Corrosion studies were carried out on two multicomponent iron based metallic glasses, Fe81B13.5Si3.5...
Amorphous iron alloys containing 8 at.% or more chromium did not suffer pitting and crevice corrosio...
Metallic glasses are multi-component metallic alloys with disordered atomic distribution unlike the...
Surface oxidation of the metallic glass Fe40Ni38Mo4B18 has been studied by X-ray photoelectron spect...
XPS and electrochemical methods have been used to investigate the influences of metalloid additives,...
Native oxide and in situ oxidation of amorphous Ni36Fe32Cr14P12B6 have been investigated at room tem...
Corrosion rates of Fe12Cr in o-phosphoric acid have been studied as a function of temperature and ac...
Amorphous iron- and nickel-base alloys containing certain amounts of chromium and phosphorus possess...
The initial oxidation of Fe40Ni40P14B6 met-glass has been investigated by using a combination of Aug...
The extent of oxidation and mechanism involving glassy and nanocrystalline phases are found to be di...
[[abstract]]The oxidation behavior of the Fe72B22Y6 bulk metallic glass and its crystalline counterp...
Surface composition and depth profile of native oxide on Fe67Co18B14Si1 metallic glass has been inve...
The pitting corrosion behavior of melt spun ribbon made at a wheel speed of 20 ms in 3.5 wt% NaCl so...
The high-temperature oxidation rate of Fe-26 Cr alloys proved highly sensitive to the method of surf...
The high temperature oxidation of iron-based alloys is a crucial factor in limiting the lifetime of ...
Corrosion studies were carried out on two multicomponent iron based metallic glasses, Fe81B13.5Si3.5...
Amorphous iron alloys containing 8 at.% or more chromium did not suffer pitting and crevice corrosio...
Metallic glasses are multi-component metallic alloys with disordered atomic distribution unlike the...
Surface oxidation of the metallic glass Fe40Ni38Mo4B18 has been studied by X-ray photoelectron spect...
XPS and electrochemical methods have been used to investigate the influences of metalloid additives,...
Native oxide and in situ oxidation of amorphous Ni36Fe32Cr14P12B6 have been investigated at room tem...
Corrosion rates of Fe12Cr in o-phosphoric acid have been studied as a function of temperature and ac...
Amorphous iron- and nickel-base alloys containing certain amounts of chromium and phosphorus possess...
The initial oxidation of Fe40Ni40P14B6 met-glass has been investigated by using a combination of Aug...
The extent of oxidation and mechanism involving glassy and nanocrystalline phases are found to be di...
[[abstract]]The oxidation behavior of the Fe72B22Y6 bulk metallic glass and its crystalline counterp...
Surface composition and depth profile of native oxide on Fe67Co18B14Si1 metallic glass has been inve...
The pitting corrosion behavior of melt spun ribbon made at a wheel speed of 20 ms in 3.5 wt% NaCl so...
The high-temperature oxidation rate of Fe-26 Cr alloys proved highly sensitive to the method of surf...
The high temperature oxidation of iron-based alloys is a crucial factor in limiting the lifetime of ...