TiO2 thin films were deposited on silicon (100) p-type wafers, using the reactive ion beam sputtering method in high vacuum as an alternative to conventional Argon ion beam sputtering in an O2 environment. Oxygen ions with 1000 eV energy were formed in a thruster and bombarded a high purity Ti target. The molecules of TiO2 were deposited on a Si (100) wafer at various substrate temperatures. The structural and optical properties were analyzed using Fourier Transform Infrared Spectroscopy in the range of 400–4000 cm-1. An ellipsometer was used to measure the thickness and refractive index of the deposited films. In order to determine the dielectric constant and capacitance of the deposited TiO2, the electrical properties were studied using a...
This paper compares titanium oxide (TiO2) thin films deposited by RF and DC sputtering. Structural c...
Recently, titanium dioxide (TiO2) thin films have attracted significant attention and became a major...
Titanium dioxide thin films were deposited by RF reactive magnetron sputtering technique on p-type s...
Tio(2) thin films were deposited on silicon (100) p-type wafers, using the reactive ion beam sputter...
We present a study of the physical properties of TiO2 thin films deposited at 200 C on Si by high ...
Titanium dioxide is extensively used as high index material for multilayer optical thin film device ...
In this paper we propose a simple method to ionize sputtered Ti and added oxygen gas, by inserting a...
Titanium dioxide (TiO2) thin films were deposited onto p-Si substrates held at room temperature by r...
We report a study of experimental possibilities to produce high purity stoichiometric SiO2 thin film...
DC reactive magnetron sputtering technique was employed for deposition of titanium dioxide (TiO2) fi...
We investigate the experimental possibilities for producing high purity stoichiometric SiO2 thin fil...
Thin films of TiO2 were grown on quartz substrate at various oxygen partial pressure using ion beam ...
Titanium oxide (TiO(2)) has been extensively applied in the medical area due to its proved biocompat...
SiO2 layers were deposited by reactive d.c ion sputtering (using 1 keV Ar+ ion gun) from a high puri...
The influence of deposition and post-deposition annealing parameters on the structure and optical pr...
This paper compares titanium oxide (TiO2) thin films deposited by RF and DC sputtering. Structural c...
Recently, titanium dioxide (TiO2) thin films have attracted significant attention and became a major...
Titanium dioxide thin films were deposited by RF reactive magnetron sputtering technique on p-type s...
Tio(2) thin films were deposited on silicon (100) p-type wafers, using the reactive ion beam sputter...
We present a study of the physical properties of TiO2 thin films deposited at 200 C on Si by high ...
Titanium dioxide is extensively used as high index material for multilayer optical thin film device ...
In this paper we propose a simple method to ionize sputtered Ti and added oxygen gas, by inserting a...
Titanium dioxide (TiO2) thin films were deposited onto p-Si substrates held at room temperature by r...
We report a study of experimental possibilities to produce high purity stoichiometric SiO2 thin film...
DC reactive magnetron sputtering technique was employed for deposition of titanium dioxide (TiO2) fi...
We investigate the experimental possibilities for producing high purity stoichiometric SiO2 thin fil...
Thin films of TiO2 were grown on quartz substrate at various oxygen partial pressure using ion beam ...
Titanium oxide (TiO(2)) has been extensively applied in the medical area due to its proved biocompat...
SiO2 layers were deposited by reactive d.c ion sputtering (using 1 keV Ar+ ion gun) from a high puri...
The influence of deposition and post-deposition annealing parameters on the structure and optical pr...
This paper compares titanium oxide (TiO2) thin films deposited by RF and DC sputtering. Structural c...
Recently, titanium dioxide (TiO2) thin films have attracted significant attention and became a major...
Titanium dioxide thin films were deposited by RF reactive magnetron sputtering technique on p-type s...