AND

The present study intends to reveal the key process issues involved in stencil printing technology for very- fine-pitch wafer bumping up to 120µm pitch. In parallel, in face of the upcoming strict regulations for introduction of lead-free back-end processes, it provides insight into printability issues of newly developed lead-free pastes and attempts a comparison with their eutectic Sn63Pb37 counterparts. Type 6 Lead-free pastes with a powder size of 5-15µm were prepared with Sn4%Ag0.5%Cu and Sn3.5%Ag compositions. Their rheological behavior and product stability were carefully examined using as guide well established type 6 eutectic Sn63Pb37 pastes. Printing experiments have revealed the significance of stencil design parameters, print speed, print pressure, separation speed and shear thinning behavior of the pastes to the success of the wafer printing up to 120µm pitches. Laser-cut stencils of 75µm were used for bumping of 300µm and 200µm pitch peripheral arrays. Furthermore, the study extended up to 120µm pitch peripheral and area arrays using an electroformed 30µm thick stencil. Bumping processes have yielded bump heights of 129 ± 2.6 µm and 110 ± 4.5µm for 300µm and 200µm pitch periphera