Add to ORKGAbstract: The lightning impulse flashover voltage on clean and polluted cap and pin insulators under high humidity conditions were measured. It was shown that the negative flashover voltage of non-uniformly polluted insulators is about 15 % lower than the positive one. Bigger difference of over 25 % was found on a model insulator. The electrical strength of disc insulators lightly polluted on the upper part of the shed and heavily polluted under shed can be twice lower than that of clean insulators. 1
This paper presents an experimental investigation on flashover performance of silicone rubber (SiR) ...
The flashover performance of contaminated insulators highly depends on the type of pollutant and its...
This paper considers the effects of a cross-arm on a contaminated polymer insulator at different ang...
The lightning impulse flashover voltage on clean and polluted cap and pin insulators under high humi...
Abstract: The concentrated dry bands on many silicone rubber insulators and also on porcelain insula...
The concentrated dry bands on many silicone rubber insulators and also on porcelain insulators were ...
Currently, it is founded that under unidirectional wind and certain landform, composite insulators a...
This work aimed to study the influence of contamination profiles and humidity on flashover electrica...
Results of pollution flashover voltage measurements and optical observation obtained for high voltag...
Insulators with semi-conducting glazes (SCG insulators) are used mainly in heavily polluted areas. B...
Nowadays, the usage of polymer insulators are increasingly popular in the power systems and their o...
International audienceAbstract The paper is aimed at the study of the dynamic of discharges propagat...
Results of pollution flashover voltage measurements and optical observation obtained for high voltag...
The experiments performed by the author of this paper: (1)A.C. dry flash-over test was performed，und...
The performance of transmission line insulator is greatly affected by dust, fumes from industrial ar...
This paper presents an experimental investigation on flashover performance of silicone rubber (SiR) ...
The flashover performance of contaminated insulators highly depends on the type of pollutant and its...
This paper considers the effects of a cross-arm on a contaminated polymer insulator at different ang...
The lightning impulse flashover voltage on clean and polluted cap and pin insulators under high humi...
Abstract: The concentrated dry bands on many silicone rubber insulators and also on porcelain insula...
The concentrated dry bands on many silicone rubber insulators and also on porcelain insulators were ...
Currently, it is founded that under unidirectional wind and certain landform, composite insulators a...
This work aimed to study the influence of contamination profiles and humidity on flashover electrica...
Results of pollution flashover voltage measurements and optical observation obtained for high voltag...
Insulators with semi-conducting glazes (SCG insulators) are used mainly in heavily polluted areas. B...
Nowadays, the usage of polymer insulators are increasingly popular in the power systems and their o...
International audienceAbstract The paper is aimed at the study of the dynamic of discharges propagat...
Results of pollution flashover voltage measurements and optical observation obtained for high voltag...
The experiments performed by the author of this paper: (1)A.C. dry flash-over test was performed，und...
The performance of transmission line insulator is greatly affected by dust, fumes from industrial ar...
This paper presents an experimental investigation on flashover performance of silicone rubber (SiR) ...
The flashover performance of contaminated insulators highly depends on the type of pollutant and its...
This paper considers the effects of a cross-arm on a contaminated polymer insulator at different ang...