Add to ORKGIn this article, four polysilanes are used as hole transporting mate-rials, together with the electroluminescent metal complex 8-hydro-xyquinoline aluminium (Alq3), in organic double layer light emit-ting diodes (LED). It appears that the side chain substituents strongly influence the device performance. Amino-substituted poly-silanes show stable device performance and a power efficiency of 0.33 lm W–1. This is an increase by more than 100 % compared to the Alq3 single layer LED (0.15 lm W–1). Key words: electroluminescence, polysilanes, double layer light-emit-ting diode, LED
Previously held under moratorium from 22 August 2019 until 22 August 2022.Organic light emitting dio...
Keywords: ed th the doping of other hole transporting materials degraded the device performance. The...
The interface between the hole transport layer (HTL) and emissive layer (EML) in polymer light-emitt...
In this article, four polysilanes are used as hole transporting materials, together with the electro...
This contribution describes an organosiloxane cross-linking approach to robust, efficient, adherent ...
Polymer double-layer light-emitting diodes were fabricated with inorganic/organic hybrid composite a...
publisher[Abstract] The organic-light-emitting-diodes(OLED) with two phosphorescent materials doped ...
Abstract: In a short time span, highly efficient organic light emitting diodes have been developed f...
Organic thin film electroluminescence devices were fabricated using by molecularly doped method with...
ABSTRACT: The novel violet-blue-emitting electroluminescent polymer I was blended at three different...
Since the discovery of conducting polymers in 1977 the field of organic electronics has evolved rapi...
The electrical and the optical properties of organic light-emitting devices (OLEDs) utilizing a 4,7-...
Restricted until 01 Apr. 2011.Organic light-emitting diode (OLED) refers to any light-emitting diode...
Increasing the efficiency and lifetime of polymer light emitting diodes (PLEDs) requires a balanced ...
A polymeric hole transporting layer (HTL) in organic light emitting devices (OLED) helps op-positely...
Previously held under moratorium from 22 August 2019 until 22 August 2022.Organic light emitting dio...
Keywords: ed th the doping of other hole transporting materials degraded the device performance. The...
The interface between the hole transport layer (HTL) and emissive layer (EML) in polymer light-emitt...
In this article, four polysilanes are used as hole transporting materials, together with the electro...
This contribution describes an organosiloxane cross-linking approach to robust, efficient, adherent ...
Polymer double-layer light-emitting diodes were fabricated with inorganic/organic hybrid composite a...
publisher[Abstract] The organic-light-emitting-diodes(OLED) with two phosphorescent materials doped ...
Abstract: In a short time span, highly efficient organic light emitting diodes have been developed f...
Organic thin film electroluminescence devices were fabricated using by molecularly doped method with...
ABSTRACT: The novel violet-blue-emitting electroluminescent polymer I was blended at three different...
Since the discovery of conducting polymers in 1977 the field of organic electronics has evolved rapi...
The electrical and the optical properties of organic light-emitting devices (OLEDs) utilizing a 4,7-...
Restricted until 01 Apr. 2011.Organic light-emitting diode (OLED) refers to any light-emitting diode...
Increasing the efficiency and lifetime of polymer light emitting diodes (PLEDs) requires a balanced ...
A polymeric hole transporting layer (HTL) in organic light emitting devices (OLED) helps op-positely...
Previously held under moratorium from 22 August 2019 until 22 August 2022.Organic light emitting dio...
Keywords: ed th the doping of other hole transporting materials degraded the device performance. The...
The interface between the hole transport layer (HTL) and emissive layer (EML) in polymer light-emitt...