A Dual-Processor solution for the MAC Layer of a Software Defined Radio Terminal

Considerable work has been devoted to studying exible computation structures for the physical layer of a software de ned radio (SDR) terminal. However there has been al-most no research on protocol processors for the upper layer protocols such as the media access control (MAC) and link protocol. A general purpose processor (GPP) is sucient for the protocol processing of a single mode terminal. How-ever, in the case of a multi-mode system required for SDR, there is a very wide set of possibilities for the MAC layer. In principle these too could be handled by a GPP. However, we show that a better solution is to use a GPP augmented by a small supplemental processor. The GPP is responsi-ble for the relatively complex protocol operations in the ac-tive mode, and the supplemental processor handles the idle mode operations. This separation of responsibilities simpli-es the implementation of hard real-time responses required by some protocols (for example IEEE 802.11), while main-taining the programmability needed to handle a wide range of protocols. In addition, this organization allows a signif-icant power savings in the idle mode. This is important because the protocol processor must process a large num-ber of tiny idle mode tasks whose aggregate eect over time dominates the power consumption in a wireless terminal. As part of our study we develop a hardware model of the supplemental processor in Verilog and its software model in C. Using commercial CAD tools we synthesized out design and evaluated the power consumption and response time of the platform. Our results show that the proposed platform meets the real-time deadlines at low power while maintain-ing programmability