Slow-wave Phase Shifter Model and Applications

A true time delay multi-bit MEMS phase shifter topology based on impedance-matched slow-wave CPW sections on a 500µm thick quartz substrate is presented. A semi-lumped model for the unit cell is derived and used in predicting the 4-bit phase shifter performance by cascading N-sections. Experimental data for a 4.6mm long 4-bit device shows a maximum phase error of 5.5 ° and S11 less than-21dB from 1-50GHz. This multi-bit phase shifter is used in an electronically tunable TRL calibration set. It is shown via calibration comparison method that the accuracy of the tunable TRL is close to a conventional multi-line TRL calibration. A maximum error bound of 0.14 at 50GHz is validated using a 0.3pF capacitor on CS-5 substrate and a 100Ω load on GaAs substrate